Special Bulletin Regarding SAM Installation

Special Bulletins Overview SAM Configuration SAM Bootstrap File Transfer Station Configuration

Update Regarding SAM Installation, September 2004
Due to major re-organizations and improvements in all components of SAM, if you are planning on installing/upgrading a SAM station, you will need to install/upgrade to at least the minimum supported version of all the following packages:
Product Minimum Supported Version
ups v4_7_1
sam_station bv6_? (unknown at this time, not stable yet)
sam_bootstrap v4_3_0
sam v6_0
sam_user_pyapi b6_1_1_0
sam_admin_pyapi b6_1_1_0
sam_mis_pyapi b6_1_1_0
sam_common_pylib b6_1_1_0
sam_idl_pylib b6_1_1_0
sam_config v4_2_28
sam_db_srv b6_1_1_0_v5_1_1_schema
sam_dimension_server_prototype b6_1_1_0_v5_1_1_schema

For further information, contact sam-admin@fnal.gov
=============================================================================
Project  : SAM
Package  : $Name:  $
Revision : $Revision: 1.1 $
Modified : $Date: 2002/04/17 16:03:42 $ by $Author: lauri $

This work is part of a development project, called SAM, which consists
of a number of coordinated packages each named sam_xxxx.  Notice of
authorship, copyright status, and terms and conditions, should the
software eventually become available for use outside Fermilab, can be
found in the README and LICENCE files in the top level directory of
the main sam package.
=============================================================================